Випуск 55

Постійне посилання зібранняhttps://dspace.khadi.kharkov.ua/handle/123456789/24843

Переглянути

Зараз показуємо 1 - 2 з 2

Cycle mechanical coefficient of useful effect of motor-transmission installations of transportation and tractor vehicles
(Харківський національний автомобільно-дорожній університет, 2024) Podrigalo, M.; Podrigalo, N.; Vakhniuk, S.; Bisha, V.; Подригало, М. А.; Подригало, Н. М.; Вахнюк, С. А.; Біша, В. М.
Problem. When determining the efficiency coefficient of the motor-transmission systems of cars and tractors, it is necessary to consider not only the losses due to viscous and dry friction but also the losses caused by the circulation of potential and kinetic energy within the transmission. These losses result from the use of typical internal combustion engines in motor-transmission systems. Currently, existing studies do not take into account the dynamic cyclic energy losses in the transmission, which prevents an accurate assessment of the cyclic efficiency coefficient. Purpose. The purpose is to determine the cyclic efficiency coefficient of motor-transmission systems with internal combustion engines, taking into account the cyclic dynamic efficiency coefficient of the transmission in vehicles equipped with internal combustion engines. Methodology. The approaches adopted in this work to achieve the stated goal are based on the theoretical foundations for determining the dynamic efficiency coefficient, the work balance in the motor-transmission system of a car (or tractor) over one oscillation period of the indicator torque and the angular velocities of the engine's crankshaft during one oscillation period of its torque. Results. The cyclic mechanical efficiency coefficient of motor-transmission systems in wheeled machines has been determined, accounting for the losses associated with the acceleration of moving masses and the torque irregularities inherent to internal combustion engines. A relationship has been established in which the cyclic coefficients of dynamic and elastic losses are equal to zero when the torque irregularity coefficient is zero, a characteristic typical of electric motors. Originality. The results of the study provide a general understanding of the proportionality of the cyclic dynamic coefficient of mechanical losses in the transmission to the torque irregularity coefficient and the difference between the squares of the circular frequencies of torque oscillations and the natural (free) oscillations of the transmission input shaft. Practical meaning. The obtained results can be recommended for identifying frequency coincidences that lead to resonance, where the cyclic coefficients of elastic and dynamic losses increase sharply.
Modeling of limitations on the use of hydraulic motor-wheels in transmissions of mobile machines
(Харківський національний автомобільно-дорожній університет, 2024) Avrunin, G.; Podrigalo, M.; Podrigalo, N.; Fidrovskaya, N.; Moroz, I.; Yatsunskyi, P.; Аврунін, Г. А.; Подригало, М. А.; Подригало, Н. М.; Фідровська, Н. М.; Мороз, І. І.; Яцунський, П. П.
Problem. The development of mobile machines with increased movement speeds requires constructive solutions for the creation of appropriate transmissions, particularly the analysis of the possibility of creating hydraulic stepless transmissions using hydraulic motors of various types. Goal. Increasing the technical level of transmissions of utility, construction and road vehicles and multi-axle high-speed vehicles with the help of advances in modern hydrostatic transmissions. Methodology. The transmissions of mobile machines are considered from the point of view of the possibility of using multi-cycle radial-piston hydraulic motors in them as gearless hydraulic motor-wheels. According to the traction-speed characteristics, the values of the torques and rotation frequencies of the hubs were calculated, and the hydraulic motor-wheels were selected according to the corresponding working volumes. As an example, calculations of the dynamics of the hydraulic drive transmission of a cleaning utility vehicle were carried out using the VisSim application program package, where the universal characteristic of the gerotor hydraulic motor was used to determine the hydromechanical efficiency in the modes from displacement to maximum rotation frequency. The results. Positive results were obtained in terms of increasing the speed of mobile machines when using hydraulic motor-wheels of radial piston multicycle action in transmissions instead of gerotor hydraulic motors, axial-piston hydraulic motors with planetary gearboxes, hydraulic transmissions with cardan shafts and mechanical transmissions. Originality. New calculated data on the initial characteristics of transmissions with a hydraulic drive were obtained, the possibilities of modeling dynamic processes in the transmission hydraulic drive depending on the action of external factors regarding the load, speed and properties of the working fluid were shown. It was established that for multi-axle vehicles with a maximum speed of up to 100 km/h, the use of electric or hydraulic motor-wheels requires the addition of planetary gearboxes with reducers or multiplier frames. Practical meaning. Recommendations for the use of radial-piston gearless hydraulic motor-wheels in mobile machines in order to improve their technical level are given.

Переглянути

Перегляд Випуск 55 за Автор "Podrigalo, N."